CPAP Full Face Mask Large w/Harness
CPAP mask is an interface for the treatment of obstructive sleep apnea using continuous positive airway pressure. It provides a good seal when fitted to the patient whilst providing maximum comfort.
OPERATION:
1. Remove plastic packaging from CPAP mask.
2. Hold the Mask Base in one hand, expand the headgear with your free hand just enough to fit comfortably over your head
3. Attach the upper strap to the ring hook of the mask.
4. Lightly hold the mask against your face and spread the headgear over your head.
5. Gently adjust the top horizontal straps to ensure the mask sits comfortably and securely on the nose.
6. Gently adjust the top crown straps as needed.
7. Connect the CPAP machine hose running at prescribed pressure to the mask.
8. If necessary, attach the oxygen supply or pressure sensing device to the standard 4.3mm port on the mask.
CLEANING:
To ensure the continuous safety and comfort of your CPAP Mask:
Before each use:
1. Inspect the mask for deterioration. Do not use if appears aged or damaged.
After each use:
1. Disassemble the silicone mask and headgear.
2. Wash the silicone mask and headgear in warm soapy water then rinse them in fresh water.
3. Keep it dry and away from direct sun light .
SPECIFICATIONS:
1. Material: PVC for hard plastic shell, PVC for cushion, Silicone for headgear.
2. Dimension:
22mmID, according to ISO 5356-1;
30mmOD, according to ISO 5356-1
4.3mmID port for pressure sensing.